Knowledge of digital technology as a basis for hardware and software design. This means in detail:
Students have an overview of the mathematical and technical fundamentals of digital technology as well as the elementary data types and operations that form the basis of programming. They are able to understand the mode of operation of digital circuits for typical embedded systems.
Students know the basic terms, relationships and operating principles. Based on this basic knowledge, they are able to familiarize themselves with deeper details, the current state of the art and practical requirements.

Fundamentals of digital technology as well as questions of circuit practice and design methodology:
- Differentiation between analog and digital
- Boolean algebra
- Normal forms
- Circuit minimization and minimal forms
- Binary numbers and their operations
- Forms of description of digital circuits (Boolean equation, truth and transition tables, circuit diagrams, pulse diagrams)
- Combinatorial circuits (switching networks), e.g. multiplexers, encoders, comparators, adders
- Sequential circuits (switching networks), e.g. flip-flops, registers, automata
- Overview of implementation options (discrete logic, ASIC, FPGA, microcontroller)

In the lecture "Digital Information Processing 1", the basics of the structure of digital circuits, circuit documentation and circuit algebra, basic circuits and elementary aspects of design and optimization are presented and explained in more detail. In the exercises, students solve circuit algebra problems and work out circuit solutions for given problems.

Formally, the requirements of the respective valid examination regulations apply

Exam

Module examination must be passed

BA Electrical Engineering

2,05%

Wöstenkühler, G.: Grundlagen der Digitaltechnik, Hanser, 2012
Fricke, K.: Digitaltechnik, Springer, 2018
Gehrke, W.; Winzker, M.; Urbanski, K.; Woitowitz, R.: Digitaltechnik, Springer, 2016
Lipp, H. M.; Becker, J.: Grundlagen der Digitaltechnik, De Gruyter, 2011
Schulz, P.; Naroska, E.: Digitale Systeme mit FPGAs entwickeln, Elektor, 2016

This module develops basic electrical engineering knowledge based on physical principles. In addition to teaching technical skills, the introduction to engineering thinking and working methods plays an important role. The topics covered enable students to analyze simple direct and alternating current networks.
Students gain a basic understanding of basic electrical engineering variables and the interaction of variables in direct current networks and linear quasi-stationary alternating current networks as well as their description using complex variables.

Based on the fundamentals of physics, some terms and fundamental relationships in electrical engineering are first explained. In addition to the usual mathematical notation, symbolic representation using circuit diagrams is also introduced. In particular, the description of electrical engineering processes using mathematical formulas is discussed.

In  DC technology, resistors and sources are introduced as components and simple basic circuits are considered. Technical realizations are also discussed and practical examples are considered. Finally, the generalization of Ohm's law and Kirchhoff's rules leads to mesh current and node potential analysis of networks.
- Physical basics: electrical charges, electrical voltage, electrical current
- Energy transfer in linear networks
- Ohm's law
- Electrical sources: Impressed voltage source, Impressed current source, Linear source with internal resistance
- Branched circuit: Two-pole as a switching element, two-pole networks and Kirchhoff's laws, series connection of two-pole networks, parallel connection of two-pole networks
- Network transfigurations, substitute sources
- Network analysis: node potential analysis, mesh current analysis

In AC technology, the analysis methods known from DC technology are extended to AC networks
- Harmonic alternating quantity as a time diagram and in complex representation
- Basic bipoles R, C, L
- Ohm's law and Kirchhoff's laws in the complex
- Pointer diagram
- Node potential analysis and mesh current analysis in complex
- Power and energy at fundamental bipoles
- Two-pole with phase shift, power and energy, complex power
- Frequency dependencies with RL/RC bipoles, locus curves, frequency response
- Resonant circuit and resonance: series resonance, parallel resonance, locus curves, Bode diagram

 

The lecture conveys the theoretical content. Based on typical tasks, corresponding practical problems are dealt with promptly in the associated exercises, practical problems are discussed and solutions are developed.

Formally, the requirements of the respective valid examination regulations apply

Exam

Module examination must be passed

BA Electrical Engineering, BA Energy Economics and Energy Data Management

4,10%

Wagner, A.: Elektrische Netzwerkanalyse, Books on Demand, Norderstedt 2001
Lindner, Brauer Lehmann: Taschenbuch der Elektrotechnik und Elektronik, Fachbuchverlag Leipzig 2001
Frohne, Löcherer, Müller: Moeller Grundlagen der Elektrotechnik, B.G. Teubner Stuttgart, Leipzig, Wiesbaden 2002

Standards and safety technology:
Students acquire an understanding of the development, structure and application of standard systems and are able to implement the most important electrical safety standards in practice in operational processes. They know the duties, tasks and responsibilities of a qualified electrician.
Scientific work:
Students can work and think scientifically. They understand the basics of scientific work through empiricism and experiments.
They know the formal structure of a scientific publication, especially technical reports, can cite correctly and have an awareness of the problem of plagiarism.
You have knowledge of basic mathematical applications of measurement error analysis and statistics.

Standards and safety technology
- Dangers of electric current
- Terms and organization of electrical safety (including tasks, duties and safety of the electrician)
- Principles and protective measures of electrical engineering
- The relevant electrical safety standards
- Structure of the standards system, international, European, national
- Laws, ordinances and accident prevention regulations
- Selected practical safety solutions

Scientific work:
- Preparation of a scientific report
- Structure: Abstract, introduction, presentation of the work, summary, appendix
- Layout: text, graphics, formulas, citations
- Scientifically correct citation methods
- Scientific misconduct (plagiarism)
- Measurement error, standard deviation, variance, linear adjustment calculation
- Gaussian error propagation, error of magnitude
- Use of spreadsheet programs and programs for word processing

 

Standards and safety technology:
The specialist knowledge is presented and explained in the lecture. In the exercises, the methodological knowledge taught is demonstrated in practical application. Examples are used to deepen the theoretical knowledge. The lecture notes and exercises as well as the laboratory regulations will be made available for download in the online learning portal.

Scientific work:
The lecture conveys the theoretical content. Based on typical tasks, corresponding practical problems are dealt with promptly in the associated exercises.

Formally, the requirements of the respective valid examination regulations apply

Exam

Module examination must be passed

BA Electrical Engineering, BA Energy Economics and Energy Data Management

3,08%

DIN VDE 0100 Errichten von Starkstromanlagen
BGV Unfallverhütungsvorschriften
Vorschriften der Europäischen Gemeinschaft
VDE-Schriftreihe Normen Verständlich; „Betrieb von elektrischen Anlagen“; Verfasser: Komitee 224
Hohe, G.; Matz, F.: VDE-Schriftreihe Normen Verständlich; „Elektrische Sicherheit“
Vorlesungsskript Normen und Sicherheitstechnik

Vorlesungskript „Wissenschaftliches Arbeiten“
Prof. Striewe & A. Wiedegärtner, „Leitfaden für Erstellung wissenschaftlicher Arbeiten am ITB“, FH Münster
N. Franck, J. Stary, „Die Technik wissenschaftlichen Arbeitens“, Ferdinand Schöningh Verlag
M. Kornmeier, „Wissenschaftlich schreiben leicht gemacht – für Bachelor, Master und Dissertation“, UTB Verlag
K. Eden, M. Gebhard, „Dokumentation in der Mess- und Prüftechnik“, Springer Verlag
H & L. Hering, „Technische Berichte“, Springer Vieweg Verlag

 

After completing this module, students will be able to
- apply mathematical techniques
- use the mathematical language of formulas
- name essential properties of real functions and recognize their relevance for the representation of states or processes in nature or in technical systems
- calculate limits of sequences and functions and examine functions for continuity
- apply the techniques of differential calculus for functions of a variable, carry out curve discussions and approximations of functions with Taylor polynomials
- apply the basic arithmetic operations and types of representation of complex numbers to problems in electrical engineering
- apply the basic concepts and methods of linear algebra, in particular methods for solving systems of linear equations.

Symmetry, monotonicity, asymptotes, continuity, sequences, concept of limits, calculation rules
Differential calculus: derivation, derivation of basic mathematical functions, derivation rules, mean value theorem, extreme points, de L'Hospital's rule, curve discussion, Taylor expansion,
Representation of functions by Taylor series, error and approximation calculation for Taylor developments
Complex numbers: Basic arithmetic operations, forms of representation - Cartesian and polar representation, complex roots
Vector calculus: vectors in R^n, basic definitions, calculation rules and operations, scalar product, orthogonality, projection, cross product, spar product
Determinants of second, third and general order, Laplace's development theorem, calculation rules for determinants
Matrices: basic concepts and definitions, arithmetic operations, inverse matrix,
Linear systems of equations: Gaussian algorithm, description by matrices, solving matrix equations
Application examples for matrices and systems of linear equations

A lecture conveys the basic knowledge of analysis and linear algebra. The teaching of the theoretical foundations is supported by numerous examples and exercises/control questions. In the exercises, students work independently on solving problems and thus deal with the concepts, statements and methods from the lecture.

Formally, the requirements of the respective valid examination regulations apply

Exam

Module examination must be passed

BA Electrical Engineering, BA Energy Economics and Energy Data Management

3,59%

Brauch/Dreyer/Haacke: Mathematik für Ingenieure, Vieweg+Teubner 2006
Fetzer, Fränkel: Mathematik 1 (2008), Mathematik 2 (1999), Springer-Verlag
Knorrenschild, Michael: Mathematik für Ingenieure 1, Hanser-Verlag, 2009
Papula, Lothar: Mathematik für Ingenieure 1 (2009), 2 (2007), 3 (2008), Vieweg+Teubner
Papula, Lothar: Mathematische Formelsammlung(2006), Vieweg+Teubner
Preuß, Wenisch: Mathematik 1-3, Hanser-Verlag, 2003
Stingl, Peter: Mathematik für Fachhochschulen, Carl-Hanser Verlag 2003

By successfully completing the module, students have acquired basic knowledge of mechanics and thermodynamics. Upon successful completion of the module, students will be able to
- apply physical laws to problems from engineering practice
- abstract problems
- filter out relevant information from problems and calculate the problems using the physical principles they have learned
- formalize verbally formulated problems and recognize and justify the relevant scientific and physical background
- name the limits within which the physical principles they have learned apply and carry out error estimates
- independently develop new content based on the material covered
- deal with problems in a solution-oriented and critical manner

Mechanics:
- Kinematics
- Newton's axioms
- Forces
- Reference systems and apparent forces
- Central body problems
- Dynamics of the mass point and systems of mass points
- Dynamics of rigid bodies
- Mechanics of deformable bodies

Thermodynamics :
- Process and state variables
- Thermal expansion, gas laws
- Heat as an energy carrier, main laws of thermodynamics
- Thermodynamic machines, cyclic processes
- Phase transformations
- Heat transport

 

Lectures, exercises with independent solving of practical tasks, independent development of teaching material

Formally, the requirements of the respective valid examination regulations apply
Content: Basic knowledge of mathematics, differential and integral calculus, vector calculus

Exam

Module examination must be passed

BA Electrical Engineering

2,56%

Hahn, Physik für Ingenieure, 2. Auflage, De Gruyter Oldenbourg Verlag 2015, ISBN 978-3-11-035056-2
Tipler, Physik, Spektrum Verlag

- Students understand and apply structuring control structures of the C++ programming language.
- They name C++ data types and structures and use them in their own program examples.
- You will analyze tasks and independently create main programs to solve them.
- You will understand the basic structures of object orientation and create your own examples of classes.
- You will program basic methods of classes and explain their meaning.

Practical course:
Basic knowledge of programming in C++ is deepened. This includes the ability to first put the solution to a specific task into an algorithmic form, to code it and to find strategies for eliminating errors, as well as to document the finished product accurately. Particular emphasis is placed on clean, structured programming. The use of object-oriented forms of representation is preferred where appropriate.

Basics of programming:
- Differences between function-oriented and object-oriented programming
- Elementary data types, constants and variables
- Using functions and classes
- Inputs and outputs with streams
- Operators for elementary data types
- Control structures
- Symbolic constants and macros
- Conversion of arithmetic data types
- The standard class string
- Functions
- Memory classes and namespaces
- References and pointers
- Definition of classes
- Methods
- Vectors
- Pointers and vectors

Practical course:
Students apply their knowledge of the following aspects of programming in a practical way:
- Use of all control structures
- Use of arrays and structs
- Use of pointers
- Use of functions
- Object-oriented programming: classes and methods

The theoretical content of the basics of programming is taught in the form of a lecture. Practical programming is demonstrated and practiced using examples and the lecture material is deepened through exercises.

Practical course:
Practical exercises carried out by each student individually on the computer. Students must implement problems in source code and prepare a written report.

Formally, the requirements of the respective valid examination regulations apply

Written exam
Internship: ungraded proof of participation

Module examination must be passed
Internship: Ungraded proof of participation must be provided

BA Electrical Engineering

3,08%

Stroustrup, Bjarne, Einführung in die Programmierung mit C++, Pearson Studium, ISBN 978-3-86894-005-3, (2010)
Ulla Kirch, Peter Prinz, C++ Lernen und professionell anwenden, mitp, ISBN: 978-3-8266-9143-0, 5. Auflage (2010)
Ulla Kirch, Peter Prinz, C++ Das Übungsbuch, mitp, ISBN: 9783826694554, 4. Auflage (2013)
Stanley B. Lippman C++ Primer, Addison Wesley (1993)

Basic specialist knowledge and methodological skills are acquired in the two areas of "measurement technology" and "fields".
Students are familiar with the principles and methods of electrical measurement. They know the properties of electrical measuring devices and can evaluate the deviations and uncertainties of measurement results. They will be able to select suitable devices for various measurement tasks. They are familiar with the basic differences between digital and analog measurement.
Students know the elementary quantities and relationships of electric and magnetic fields and can reproduce them. On this basis, they are able to calculate and roughly estimate the field distributions and effects of basic field-generating arrangements for constant and time-varying quantities. Students will be able to transfer their basic field knowledge to typical arrangements and equipment used in electrical engineering (e.g. insulators, capacitors, transformers, cables) and apply it to basic problems and tasks relating to this equipment.

"Measurement technology" area:
- Standards, terms, units and norms
- Measurement signals and their characterization (analogue, digital, rectified, effective and average values)
- Measurement of electrical quantities (current, voltage, resistance, power and energy)
- Measurement deviation and measurement uncertainty, complete measurement result
- Oscilloscopes
- Time and frequency measurement

"Fields" area:
The electrostatic field:
- Basic concepts, electric charge, surface charge density, displacement flux density, potential, field strength, energy density, forces
- Homogeneous field in the plate capacitor, inhomogeneous field distribution with point charges, concentric spheres, coaxial cylinders, parallel round conductors
The magnetic field
- Flow, magnetic field strength, flux density, flux, magnetic voltage, permeability, energy density
- Induction, generator principle, transformer principle
- long conductor, double line, coaxial line, coil as toroid, transformer, transformer
 Representation of electric and magnetic field problems using equivalent circuit diagrams

 

The theoretical knowledge is presented and explained in the lecture. In the exercises, the methodological knowledge taught is applied to elementary examples and practical problems are dealt with.
Reference is made to practical applications.

 

Formally, the requirements of the respective valid examination regulations apply
Content: Electrical engineering 1

Exam

Module examination must be passed

BA Electrical Engineering

3,08%

Bereich „Messtechnik“
Thomas Mühl: Einführung in die Elektrische Messtechnik
Rainer Parthier: Messtechnik
Schrüfer: Elektrische Messtechnik

Bereich „Felder“
Führer, Heidemann, Nerreter: Grundgebiete der Elektrotechnik 1, Hanser, 2020
Albach: Elektrotechnik, Pearson, 2020

This module is initially intended to provide students with an introduction to the possible areas of specialization in the Electrical Engineering study program so that they can make the most informed decision possible when choosing their specialization. Students gain an overview of the topics of the main course of study and of later professional fields of application and prospects in a practical environment. This enables students to assess whether the respective area of specialization matches their personal inclinations and abilities.
In the specialization area "Drive Systems and Automation (A&A)", students can independently identify the components of an electrical drive system and understand its functional principles. They recognize the basic task of the components in the system. This knowledge is the basis for a later specialization in the field of A&A.
Students should gain an insight into the specialization area "Energy Supply and Environment (E&U)". They are given an overview of the topics of the main course of study as well as the fields of activity and areas of responsibility of an engineer in the field of E&U. Basic examples will be used to illustrate the specialist skills required for this specialization. In addition, they should be able to classify and discuss fundamental issues relating to energy supply and use a standardized terminology for nominal, rated and power values of electrical supply networks.
For the specialization "Industrial Electronics and Sensor Technology (I&S)", students receive an overview of the technical content and career opportunities. They gain an insight into electronic components and systems, as well as important development methods in an industrial environment. In addition, the basic knowledge of sensor technology in connection with electronics is taught using practical examples.
The correlation of the various specializations in the electrical engineering study program is clarified.
Students then learn the basic concepts of business administration as a supplement to the predominantly technical electrical engineering course. In preparation for the comparative evaluation of the economic efficiency of technical equipment as part of the specialist training in the following semesters, students learn how to apply cost and investment calculation methods in business studies.
In preparation for the implementation of projects in a professional environment (companies as well as universities/research institutions), students learn the basics of project management. The focus here is on research and development projects. Students learn methods for planning and implementing projects. This includes the handling of resources as well as personnel.

Introduction to the specialization A&A:
- Introduction to the design of drive systems;
- Linear and rotating electrical machines;
- Power electronics;
- Control, regulation and automation;
- Load characteristics of driven machines;

Introduction to the specialization E&U:
- Course of study, tasks and perspectives of the engineer in E&U, fields of activity;
- Energy and environmental discussion for the earth (primary energy consumption, per capita consumption, forms of energy, energy reserves, energy resources, energy efficiency, environmental impact);
- Electrical energy supply (use of electrical energy, electricity energy sources and energy conversion, load profile and use of power plants, power circuits and terms, structure of energy supply and legal basis, energy market);
- Milestones of engineering in the E&U (long-distance transmission of electrical energy, presentation of selected energy supply projects);
- Basic concepts and basic knowledge (temporal system states, oscillation calculation, metering arrow systems, designations);

Introduction to the specialization I&S:
- Overview of the subject areas and explanation of career prospects;
- Methods of circuit and system development;
- Discrete and integrated electronics;
- Sensors and their application;
- Technical boundary conditions in the industrial environment;
- Signal and data processing;
- Simulation tools;

Business administration (BWL)
- Legal forms
- Corporate management
- Bookkeeping, balance sheet and P&L
- Cost accounting
- Financing
- Investment calculation methods
- Human resources and materials management
- Production process planning
- Marketing

Project management (PM)
- Types of projects
- Forms of organization
- Time and financial planning
- Project description
- Personnel management
- Teamwork, problems and conflicts, meetings and workshops
- Monitoring, documentation / reports

 

The basic theoretical knowledge is presented and explained in the lecture. Practical applications are used to deepen the knowledge.
The general characteristics of the sector are presented and explained as an introductory event. The in-depth area is presented and discussed using practical examples.
Lecture with presentation technique and blackboard work, involvement of students through questions and discussion. The lecture notes will be made available for download.

Formally, the requirements of the respective valid examination regulations apply

Exam

Module examination must be passed

BA Electrical Engineering

2,56%

Schröder, D.: Elektrische Antriebe
Felderhoff, R.: Leistungselektronik
Brosch, P. F.: Moderne Stromrichterantriebe
K. P. Budig : Drehstromlinearmotoren
Harnischmacher: Skript zur Vorlesung
Flosdorff/Hilgarth: Elektrische Energieverteilung
Clausert/Wiesemann/Hindrichsen/Stenzel: Grundgebiete der Elektrotechnik
Bernstein, Herbert: Messelektronik und Sensoren, Springer Verlag
Schiessle, Edmund: Industriesensorik, Vogel Verlag
Sedra, Adel S.: Microelectronic circuits, Oxford University Press
Schulz, Peter: Digitale Systeme mit FPGAs entwickeln: Vom Gatter zum Prozessor mit VHDL, Elektor Verlag
Tietze, Ulrich;  Schenk, Christoph:  Halbleiter - Schaltungstechnik, Springer Verlag
Thommen, Achleitner, Gilbert, Hachmeister, Kaiser: Allgemeine Betriebswirtschaftslehre, Springer (2017)
Daum, Greife, Przywara: BWL für Ingenieurstudium und -praxis, Springer (2014)
Carl, Fiedler, Jorasz, Kiesel: BWL kompakt und verständlich, Springer(2017)
Lessel: Projektmanagement, Cornelsen (2002)
Litke: Projektmanagement, Hanser (2007)
Burkhardt: Projektmanagement, Publicis MCD (2000)
Felkai, Beiderwieden: Projektmanagement für technische Projekte, Vieweg+Teubner (2011)
Ebert: Technische Projekte, Wiley-VCH (2002)
Zimmermann, Stark, Rieck: Projektplanung, Springer (2010)

Using the knowledge acquired in the Engineering Methodology module, students should determine the reproducibility of theoretical expected values in practical experiments under real conditions in the subjects of direct current technology and alternating current technology. The experimental results are to be presented in writing in a scientific report.
The students have received an introduction to the basics of design and troubleshooting practice. They will be able to construct digital circuits of a manageable size according to a circuit diagram and to design them with computer support on the basis of programmable circuits. They will be able to use universal test equipment such as oscilloscopes and logic analyzers. Building on this foundation, they are able to familiarize themselves with more complex tasks and the use of development systems.

Students carry out practical experiments on the topics of electrical engineering and the fundamentals of digital technology in intensively supervised small groups - accompanying the compulsory courses of the 1st and 2nd semesters.
In this context, students gain practical experience in setting up and working with methods, components, setups, measuring devices and computer-based tools.

Digital technology:
Construction and commissioning of digital circuits (combinatorial and sequential basic circuits) with gates and flip-flops, as well as with programmable circuits.
- The tasks relate to application-relevant sub-circuits as well as manageable, practical projects (e.g. decoder, counter and shift register, stopwatch, pulse pattern generator).
- Test platform:  PC with development system and various evaluation platforms.
- Design methodology: Predominantly computer-aided design via circuit diagram.

Electrical engineering 1:
- Node potential analysis of linear direct current networks
- Complex fundamental bipoles
- Frequency-selective voltage divider

 

The students work out the circuit solution according to the respective task and develop functional hardware. Typical work steps: Design (by hand or on the computer) - eliminating formal design errors if necessary - programming the circuit if necessary -  setting up the test arrangement - testing -  finding and eliminating functional errors.

Experiments in the laboratory and practical implementation of what has been learned by the students. Working in small groups that organize and coordinate themselves.

Formally, the requirements of the respective valid examination regulations apply

Ungraded certificate of attendance

Module examination must be passed, i.e. ungraded proof of participation must be provided in both courses

BA Electrical Engineering

/

Fricke, Klaus: Digitaltechnik, Springer Verlag
Beuth, Klaus: Digitaltechnik - Elektronik 4, Vogel Verlag
Ulrich Tietze, Christoph Schenk, Eberhard Gamm: Halbleiter - Schaltungstechnik, Springer Verlag
Matthes, Wolfgang: Embedded Electronics 2 - Digitaltechnik, Elektor Verlag
Wagner, A.: Elektrische Netzwerkanalyse. - Books on Demand, Norderstedt 2001

 

After completing this module, students will be able to
- solve integrals of different functions of a variable using different integration techniques
- solve homogeneous and inhomogeneous 1st and 2nd order ordinary differential equations
- Explain basic concepts of matrix theory
- Calculate eigenvalues and eigenvectors

Integral calculus(one-dimensional): Basic function, indefinite integral, definite integral,
Main theorem of differential and integral calculus, mean value theorem of integral calculus,
Integration techniques: elementary calculation rules, partial integration, substitution, partial fraction decomposition,
improper integrals,
Numerical integration (rectangular, trapezoidal and Simpson's rule)
Ordinary linear differential equations:
1st order linear differential equations: separation of variables, variation of constants, initial value problems
Linear differential equations of 2nd order with constant coefficients, general solution of the inhomogeneous differential equation (variation of the constant)
Electrical circuits and differential equations
Vector spaces, subspaces,
Linear independence, basis, dimension, kernel, image, rank of matrices,
Eigenvectors and eigenvalues

A lecture provides advanced knowledge of analysis and linear algebra. The teaching of the theoretical foundations is supported by numerous examples and exercises/control questions. In the exercises, students work independently on solving problems and thus deal with the concepts, statements and methods from the lecture.

Formally, the requirements of the respective valid examination regulations apply
Content: Mathematics 1

Exam

Module examination must be passed

BA Electrical Engineering, BA Energy Economics and Energy Data Management

3,59%

Papula, Lothar: Mathematik für Ingenieure 1-3, Vieweg, Braunschweig-Wiesb. 2000
Brauch/Dreyer/Haacke: Mathematik für Ingenieure, B.G. Teubner 1995
Stingl, Peter: Mathematik für Fachhochschulen, Carl-Hanser Verlag 1999
Papula, Lothar: Mathematische Formelsammlung, Vieweg, Braunschweig-Wiesb. 2000
Fetzer, Fränkel: Mathematik 1-2, Springer-Verlag, 2004
Preuß, Wenisch: Mathematik 1-3, Hanser-Verlag, 2003
Feldmann: Repetitorium Ingenieurmathematik, Binomi-Verlag, 1994

Mastering the subject of oscillations, waves and optics means understanding the nature of electromagnetic waves and being able to calculate simple optical and analytical applications.
On completion of the module, students will be able to apply basic knowledge relevant to electrical engineers in the field of oscillations, waves and optics and the underlying physical principles to problems.
The ability to abstract, problem-solve and criticize is trained. They have the ability to formalize verbally formulated problems and to recognize and justify the relevant scientific and physical background. They are able to independently develop new content on the basis of known material.

'Vibrations and waves:
- Free harmonic oscillations
- Damped vibrations
- Forced vibrations
- Pendulum motions
- Superposition and coupling of oscillations
- Harmonic waves, their propagation, superposition
- Interference and diffraction
- Limits of the wave model
- Photoelectric effect and spectra

Optics:
- Light propagation
- Geometrical optics
- Optical instruments (telescope, microscope,...)
- Wave optics
- spectral analysis

Lectures, exercises with independent solving of practical tasks, independent development of teaching material

Formally, the requirements of the respective valid examination regulations apply
Content: Physics 1, Mathematics 1

Exam

Module examination must be passed

BA Electrical Engineering

2,56%

Hahn, Physik für Ingenieure, 2. Auflage, De Gruyter Oldenbourg Verlag 2015, ISBN 978-3-11-035056-2
Tipler, Physik, Spektrum Verlag

Students know the most important active and passive components with regard to their structure and mode of operation, their typical characteristic values and operating conditions as well as criteria to be observed when selecting and using them. They will be able to select components for specified applications and take the respective operating conditions into account.
Students also know important basic circuits for practical applications. They understand their function and are able to assess the suitability of these basic circuits for typical applications and to develop and dimension corresponding functional units on the basis of common circuit solutions. Students know the basic terms, relationships and operating principles. On the basis of this basic knowledge, they will be able to familiarize themselves with the current state of the art and practical requirements.

Electronic components:
- Physical basics
- pn junction, types of diodes
- Transistors (bipolar, field effect transistors)
- Operational amplifiers
- Passive components
Circuit technology:
- Fundamentals of circuit calculation (network analysis)
- Diode circuits
- DC and AC circuit calculations
- Small signal equivalent circuit diagrams
- Transistors in switching and amplifier operation
- Circuits with operational amplifiers and comparators

 

In the lecture, physical effects, operating principles and characteristic values of various electronic components are presented and explained in more detail. In addition, the individual basic circuits and their function, as well as their characteristic values and calculation principles are taught.
In the exercises, this knowledge is deepened by solving problems using suitable methods.
In addition to theory, practical problems (development methodology, dimensioning, system integration)
are also addressed in both the lecture and the exercises;

Formally, the requirements of the respective valid examination regulations apply

Exam

Module examination must be passed

BA Electrical Engineering

3,08%

Beuth, Klaus: Bauelemente, Vogel Verlag
Böhmer, Erwin: Elemente der angewandten Elektronik, Vieweg+Teubner Verlag
Göbel, Holger: Einführung in die Halbleiter-Schaltungstechnik, Springer Verlag
Horowitz, Paul: The art of electronics, Cambridge Univ. Press
Reisch, Michael: Elektronische Bauelemente, Springer Verlag
Sedra, Adel S.: Microelectronic circuits, Oxford University Press
Sze, S.M.: Physics of semiconductor devices, Wiley
Tietze, Ulrich;  Schenk Christoph:  Halbleiter - Schaltungstechnik, Springer Verlag

Students have basic methodological knowledge for carrying out and evaluating simple physical experiments. This knowledge is applied independently in a team to complete given tasks.
Students are able to build and test elementary electronic circuits according to circuit diagrams. They can use laboratory power supplies, multimeters, function generators and oscilloscopes to check typical characteristic values and performance data as well as the respective mode of operation using measurement technology. The practical course supplements and applies the theory taught. Students practise the practical execution of measurement processes, the evaluation of measurement results, the documentation and presentation of the results. Students are taught to work on their tasks in a team and to coordinate their work. The practical course enables them to work safely with measuring equipment and procedures.
The experimental results should be presented in writing in a scientific report.

Students carry out practical experiments on the topics of physics, electronics and electrical engineering in intensively supervised small groups - accompanying the compulsory courses of the 1st to 3rd semesters. In this context, students gain practical experience in setting up and working with methods, components, setups, measuring devices and computer-based tools.

Physics:
- Thread pendulum, spring pendulum, physical pendulum
- Mass moment of inertia, shear modulus (dynamic), Maxwell's wheel
- Adiabatic exponent according to Flammersfeld and Rüchardt, Mohr's balance
- Determination of measurement deviations and uncertainties
- Presentation of results in tables and diagrams; linear regression; linearization

Electronics:
- Measuring the behavior and relevant characteristics of semiconductor components (diodes, bipolar transistors, field-effect transistors)
- Construction and measurement of important basic circuits and compound circuits using active and passive components (diode circuits, basic transistor circuits).
- Transistor in switching and amplifier operation
- Operational amplifier circuits
- Toggle stages

Electrical engineering:

Practical experiments in the laboratory. Corresponding practical conditions are investigated here using typical experiments. The students work out the circuit solution or dimensioning according to the respective task,  develop functional hardware and carry out the respective measurements. Some subtasks are limited to measurements on ready-built demonstration platforms (time saving). Practical implementation of what students have learned. Working in small groups that organize and coordinate themselves.

Formally, the requirements of the respective valid examination regulations apply

Ungraded certificate of attendance

Module examination must be passed, i.e. ungraded proof of participation must be provided in all three courses

BA Electrical Engineering

/

Hahn, Physik für Ingenieure, Oldenbourg Verlag 2007, ISBN 978-3-486-27520-9
Göbel, Holger: Einführung in die Halbleiter-Schaltungstechnik, Springer Verlag
Ulrich Tietze, Christoph Schenk, Eberhard Gamm: Halbleiter - Schaltungstechnik, Springer Verlag
Böhmer, Erwin: Elemente der angewandten Elektronik, Vieweg+Teubner Verlag
Horowitz, Paul: The art of electronics, Cambridge Univ. Press
Matthes, Wolfgang: Embedded Electronics 1 - Passive Bauelemente, Elektor Verlag
Versuchsanleitungen zum Praktikum ET 2
Thomas Mühl  -   Einführung in die Elektrische Messtechnik
Rainer Parthier - Messtechnik

 

'The students should use important aspects and basic principles of current software development in a project and team-oriented manner on the basis of manageable software projects from various application areas and document and present their project.

Key skills - rhetoric and presentation in IT projects (SV)
- Preparing content in a target group-oriented way
- Applying the most important presentation principles
- Giving and receiving feedback
- Presenting the results developed in the team

Internship on the IT project (P):
- Working in a team
- Independent processing of projects
- Compliance with specified interface definitions and boundary conditions
- Implementation of the theoretical principles
- Use of different languages in a joint project
- Creation and documentation of sub-modules of complex software systems

Key skills - rhetoric and presentation in IT projects:
Definition of rhetoric or applied rhetoric, means of persuasion according to Aristotle,
5 points for the success of a presentation:
- Goal and structure: topic, goal, target group, didactics, structure
- Personal communication + performance: language (body language, voice, content), clothing, personal appearance, dealing with the audience
- Design: media, slide design
- Group work: allocation of roles and tasks, teamwork
- Formalities: citation of sources

Internship on the IT project:
In this internship, the basic theoretical principles of software development and the key skills for project documentation and presentation are put into practice by working on a completed task that covers all relevant aspects
. Possible tasks are:
- Development of distributed software systems
- Programming ergonomic user interfaces (menus and window techniques)
- Programming of software interfaces from the specialist areas of specialization of the Faculty of Electrical Engineering
- Programming tasks to solve engineering problems
- Research on the Internet or in the library relating to the functionality of real, technically implemented systems/devices

Seminar-style course in which students reflect on their project work in a group, collegial supervision, analysis and consideration of the most important success factors for teamwork, analysis and practice of the optimal documentation and presentation method for the respective project; discussion in and feedback from the group.
Practical course in which various projects are carried out under guidance and given tasks.

Formally, the requirements of the respective valid examination regulations apply

Presentation of the project results on the basis of a compulsory written paper followed by an oral examination.

Module examination must be passed

BA Electrical Engineering

3,59%

OATs, IEC 61131-3 Programming, Dr. Friedrich Haase (2005)
Lewis R. W.: Programming industrial control systems using IEC 1131-3 (Rev. ed.)
Bonfati, Monari, Sampieri: IEC1131-3 Programming Methodology
Mohn, Tiegelkamp: SPS-Programmierung mit IEC1131-3
Rammer Ingo: Advanced .NET Remoting, Apress
MacDonald Matthew: User Interfaces in C#/VB.NET, Apress
Jones, Ohlund, Olson: Network Programming for .NET, Microsoft Pres
allgemeine Bücher zur SPS-Technik
Webseiten der Unternehmen WAGO und Beckhoff
Kai Luppa: Skript und Lastenheft zum IT-Projekt
Kai Luppa: Skript Grundlagen Programmierung / Softwaretechnik, FH Dortmund
Robin Nixon: Learning PHP, MySQL & JavaScript: With jQuery, CSS & HTML5 (Learning Php, Mysql, Javascript, Css & Html5), O'REILLY
W.H. Press et al., Numerical Recipes; Cambridge University Press, 2007
Rob Williams: "Real-Time Systems Development", Elsevier 2006
Jack Ganssle: "The Firmware Handbook", Elsevier 2004
Jack Ganssle: "The Art of Designing Embedded Systems", Newnes 2008
Thomas Kibalo: "Beginner's Guide to Programming the PIC32", Electronic Products, 2013
Cord Elias: "FPGAs für Maker", dpunkt.verlag, 2016
Design Patterns. Elements of Reusable Object-Oriented Software, Addison-Wesley 2009

Students learn the basic properties and calculation methods of electrical multiphase systems. They should be able to analyse multiphase systems and recognize the characteristic features of multiphase supply networks and installations. They should be able to master calculation methods for symmetrical and asymmetrical states of the three-phase network and apply them to specified equivalent circuit diagrams. The effect of different neutral point treatments on the network behavior should be clear to the students.

'- Introduction
(generation of single-phase and multi-phase systems, symmetrical current and voltage systems, rotary generators, balanced and interlinked multi-phase systems);
- Three-phase systems
(symmetrically and asymmetrically linked three-phase systems, complex calculation, power measurement);
- Method of symmetrical components
(transformation rule and properties, equivalent circuit diagrams and measuring circuits);
- Simulation of unbalanced network states
(representation of parallel and longitudinal unbalances in symmetrical components, calculation of unbalances in the three-phase network);
- Three-phase transformers
(structure, areas of application, mode of operation, equivalent circuit, circuits, switching groups, symmetrical components in three-phase transformers, neutral point treatment)

The theoretical specialist and methodological knowledge is presented and explained in the lecture. In the exercises, the methodological knowledge imparted is applied and deepened using practical examples.
The lecture notes will be made available for download online.

Formally, the requirements of the respective valid examination regulations apply
Content: Fundamentals of electrical engineering, in particular alternating current technology

Exam

Module examination must be passed

BA Electrical Engineering

2,05%

Happoldt/Oeding: Elektrische Kraftwerke und Netze,
Flosdorff/Hilgarth: Elektrische Energieverteilung,
Clausert/Wiesemann/Hindrichsen/Stenzel: Grundgebiete der Elektrotechnik,
Schlabbach: Elektroenergieversorgung,
Harnischmacher: Skript zur Vorlesung Mehrphasensysteme.

Basic electrical engineering course that provides important mathematical methods and tools for advanced courses such as control engineering, electrical machines, power electronics and communications engineering. Students master both continuous-time and discrete-time signal and system description as well as the corresponding representations in the frequency domain. They will be able to independently apply the various mathematical methods to specific tasks in electrical engineering, e.g. for circuit and controller design.
 

- Time signals
        rectangular, step, Dirac, si function, Fourier series, harmonic analysis/synthesis of non-sinusoidal periodic processes
- Transformations
        Fourier transform, Laplace transform, Fast Fourier transform
- Systems
        Convolution, transmission behavior, frequency behavior of networks, filter networks, locus curves, Bode diagram, spectra
- Discrete-time signals and systems
        discrete Fourier transform, sampling theorem, z-transform, digital filter

 

In the lecture, the theoretical basics are taught in presentations. By using software (e.g. MATLAB, Octave or SciLab) in the lecture framework, this knowledge is put into practice and deepened. In the exercises and homework, the acquired knowledge is applied by working on practical tasks. References are made to applications in further courses.

 

Formally, the requirements of the respective valid examination regulations apply
Content: Mathematics 1 and 2, Electrical Engineering 1

Exam

Module examination must be passed

BA Electrical Engineering

2,05%

Arnold Führer, Klaus Heidemann, Wolfgang Nerreter: Grundgebiete der Elektrotechnik, Carl Hanser Verlag GmbH & Co. KG, 2011
Moeller, Fricke u.a.:   Grundlagen der Elektrotechnik, Teubner, Stuttgart 1967
Martin Werner: Signale und Systeme, 3. Auflage, Vieweg+Teubner, 2008
Uwe Kiencke, Holger Jäkel: Signale und Systeme, 4. Auflage, Oldenbourg Verlag München Wien, 2008
Horst Clausert, Gunther Wiesemann:  Grundgebiete der Elektrotechnik 2: Wechselströme, Drehstrom, Leitungen, Anwendungen der Fourier-, der Laplace- und der z-Transformation, De Gruyter Oldenbourg 2002

Students are introduced to current methods of designing and verifying digital circuits using a hardware description language such as VHDL or Verilog and implementation on a field programmable logic device (FPGA).
Students can design, simulate and verify digital circuits according to specifications at register transfer level and implement them on an FPGA.
 

Introduction to a hardware description language
- Modeling at the data flow level
- Conditional and unconditional foggy instructions
- Design at the gate level
- Description with procedural language elements
- Arithmetic
- State machines
-Verification
-Construction of FPGA logic devices
-Basics of circuit synthesis

Lecture and computer-based exercises with FPGA components

Formally, the requirements of the respective valid examination regulations apply

 

Written exam
Internship: ungraded proof of participation

Module examination must be passed
Internship: Ungraded proof of participation must be provided

BA Electrical Engineering

3,08%

Schulz/Naroska: Digitale Systeme mit FPGAs entwickeln (Elektor)
Reichardt/Schwarz: VHDL-Synthese (Oldenbourg)
Hoppe: Verilog (Oldenbourg)
Elias: FPGAs für Maker (dpunkt.verlag)
Jorke: Rechnergestützter Entwurf digitaler Schaltungen (fv)
Ashenden: Digital Design (Morgan Kaufmann)

Students will be able to analyze and dimension basic power electronics circuits. They know and recognize the switching behavior of the individual components and are able to use them sensibly in practical applications.

 

The basic knowledge of power electronics is taught. The principles are explained, the components of power electronics are introduced and the basic circuits of power electronics are covered. By referring to practical application examples, the circuit structure and the components are deepened.

Contents:   - Structure, function and properties of modern power semiconductors
                  - Non-commutating, grid-connected and self-commutated converter circuits
                  - Modulation methods
Practical applications:  
                  - Inverter circuits in industrial applications
                  - DC/DC converters
Speed control by means of frequency inverter
- Speed control by means of frequency inverter

 

The theoretical knowledge is presented and explained in the lecture. Based on the components presented, their structure and functionality are worked out together. The basic circuits are presented and their function is explained using examples. The dimensioning of the circuits is applied and further deepened in exercises on practice-oriented tasks. Accompanying lecture notes are available to all students.

 

Formally, the requirements of the respective valid examination regulations apply

Written exam
 

Module examination must be passed
 

 BA Electrical Engineering

1,54%

Felderhoff, Rainer; Busch, Udo: Leistungselektronik
Michel, Manfred: Leistungselektronik
Specovius, Joachim: Grundkurs Leistungselektronik
Schröder, D. Elektrische Antriebe – Band 4: Leistungselektronische Schaltungen, Felderhoff, R. Leistungselektronik
Probst, Uwe: Leistungselektronik für Bachelors
Brosch, P. F. Moderne Stromrichterantriebe
Versuchsanleitungen Fachpraktikum Leistungselektronik
Vorlesungsskript Leistungselektronik

Students will be familiar with the structure of measurement and test systems and their programming. For example, they know how modern digital measuring and test devices are constructed and can be controlled remotely via interfaces. They also know the basic test methods for electronic assemblies and integrated circuits. Based on this knowledge, you will be able to take basic testability mechanisms into account when designing circuits.

Practical course:
Students can operate various digital measuring devices and integrate them into automatic test stations. They can use graphical or script-based programming methods to implement automatic test sequences.

The course covers the design and operation of typical measuring devices and other laboratory devices that can be used for testing purposes. Furthermore, the structure, configuration and programming of modular test systems are taught.
The following are covered in detail:
- Oscilloscope, logic analyzer, spectrum analyzer, network analyzer
- Function generator, pattern generator
- System multimeter, programmable power supply, load simulator
- Instrumented computers
- Modular, computer-aided test systems
- Programming methodology
- Test coverage, testability
- Optical test methods: Automatic optical inspection (AOI), X-ray inspection (AXI)
- Electrical test methods: Functional test (FKT), in-circuit test (ICT), flying probe test (FPT), boundary-scan test (JTAG)

Practical course:
Experiments are carried out on the following topics:
- Remote control of measuring devices via PC
- Programming of test sequences
- Measured value analysis and measurement data processing

In the lecture, the devices and methods are presented and explained in more detail. In the exercises, tasks on measurement data processing and programming methodology are dealt with. Analyses of test program sequences round off the subject area.

Practical course:
Students assemble various measuring devices into a test station or configure a test system for testing a specified assembly. They create simple test programs and evaluate measurement and test protocols.

Formally, the requirements of the respective valid examination regulations apply
Content: Measurement technology

Written or oral exam
Internship: ungraded proof of participation

Module examination must be passed
Internship: Ungraded proof of participation must be provided

BA Electrical Engineering

3,08%

Mühl, T.: Einführung in die elektrische Messtechnik, Springer, 2014
Parthier, R.: Messtechnik, Springer, 2020
Schrüfer, E.; Reindl, L.; Zagar, B.: Elektrische Messtechnik, Hanser, 2018
Lerch, R.: Elektrische Messtechnik, Springer, 2016
Berger, M.: Test- und Prüfverfahren in der Elektronikfertigung, VDE, 2012
Hartl, H.; Krasser, E.; Söser, P.; Winkler, G.: Elektronische Schaltungstechnik, Pearson, 2019
Angermann, A.; Beuschel, M.; Rau, M.; Wohlfarth, U.: MATLAB – Simulink – Stateflow, De Gruyter, 2021
Stein, U.: Programmieren mit MATLAB, Hanser, 2017
Online-Dokumentationen und Tool-Hilfen zu MATLAB (MathWorks), LabVIEW (National Instruments), VEE (Keysight)
Diverse Unterlagen der Gerätehersteller

Students are familiar with the structure of microcontrollers and the associated basics of computer architecture. They learn about different architectures (e.g. RISC and CISC) and their advantages and disadvantages. They learn how to select a suitable microcontroller based on application requirements and how typical design problems can be solved in terms of programming. They will be able to use an integrated development environment to solve technical problems by programming a microcontroller close to the hardware. Students will be familiar with the relevant terms, relationships and operating principles such as pipelining, watchdogs and interrupts. On the basis of this basic knowledge, they are able to familiarize themselves with more in-depth details, the current state of the art  and practical requirements, as well as begin their own design, development and programming work in the field of embedded systems.

Internship:
Students will be able to solve typical subtasks in the development of embedded systems in terms of programming and use the usual E-A equipment of microcontrollers (E-A ports, counters/timers, interface controllers, A/D converters). They are also able to make use of the means offered by the manufacturers to familiarize themselves with microcontroller families - i.e. integrated development environments and starter kits - in order to familiarize themselves with certain controller types.

The course introduces the basic structure of microcontrollers using practical examples, their use for application problems, the relevant basics of computer architecture and knowledge of hardware-related programming
. - Basic structure of microcontrollers and their use in applications
- Processor architectures (e.g. RISC-V)
- Pipelining
- Processor peripherals and interface technologies, such as AD and DA converters or pulse width modulation
- Typical communication interfaces (e.g. UART, SPI, I2C)
- Watchdogs, interrupts, timers and DMA principles
- Basics of hardware-related programming of microcontrollers

Practical course:
Experiments are carried out on  hardware-related programming, which include basic functions of a microcontroller such as the use of E-A ports, a serial interface,  interrupt service routines, watchdog mechanisms or a timer. The functions are discussed with the help of suitable peripheral modules (e.g. distance sensor).

In the lecture, the operating principles and relationships are presented and explained in more detail. In the exercises, tasks suitable for exams are dealt with, such as address calculations, analyses of short program sequences or calculating with the relevant data types.
Practical course:
Students learn how to use microcontrollers to solve common technical problems.

Formally, the requirements of the respective valid examination regulations apply

Written exam
Internship: ungraded proof of participation

Module examination must be passed
Internship: Ungraded proof of participation must be provided

BA Electrical Engineering

3,08%

Wüst: „Mikroprozessortechnik“, Vieweg, 2010
Brinkschulte, Ungerer: „Mikrocontroller Mikroprozessoren“, Springer, 2010
Patterson, Hennessey: "Computer Organization and Design RISC-V Edition: The Hardware Software Interface", Morgan Kaufmann, 2017
White: "Making Embedded Systems", O'Reilly Media, 2011

Students should acquire a sound knowledge of the following aspects of control engineering:
- Theory of dynamic systems for the analysis and synthesis of control systems
- Theoretical and experimental modeling methods
- Design and parameterization of single-loop single-variable control systems



 

Fundamentals of control engineering for control applications in automation:
- Description of linear, continuous-time and systems in the time and frequency domain  (state space representation, Laplace transformation, frequency response representation)
- Simple methods of stability analysis of control loops
- Standard transfer elements and controllers - treatment of meshed systems
- Heuristic and analytical methods of controller synthesis for single-loop single-variable control
- Experimental modeling

 

The mathematical and theoretical content is taught in the form of a lecture. Exercises, some of which are computer-aided (MATLAB/SIMULINK, Octave, Scilab), are used to establish a link to practical applications. Various systems of programmable logic controllers are available for application to existing control engineering laboratory models. Such laboratory processes are treated and presented as practical examples in exercises.

 

Formally, the requirements of the respective valid examination regulations apply
Content: Transformations

Written exam
 

Module examination must be passed
 

BA Electrical Engineering

1,54%

Lunze, J.: Regelungstechnik 1
Unbehauen, H.: Regelungstechnik 1

Students know the function of important sensors and electronic components in an industrial environment. They are able to understand more complex circuits and design them for industrial applications. They can combine discrete components and integrated circuits and implement simple applications together with sensors. They are able to calculate and dimension electronic circuits and simulate them in a simulation environment.
Based on this knowledge, they will be able to understand electronic components in industry and take practical requirements into account during development.

Practical course:
Students are able to develop, dimension and construct practical circuits. Based on theoretical considerations, they are able to simulate these circuits, build the circuits and compare the measurement results with the previous calculations and simulations.

Control and readout electronics:
- Common electronic circuits for evaluation and control (e.g. converters, amplifiers, measuring bridges)
- Industry requirements (temperature range, interference immunity, accuracy, safety, durability)
- Practical properties of operational amplifiers
- Circuit dimensioning
- Circuit simulation
Sensor types, characteristics and methods:
- Basic terms and classification of sensors
- Position sensors (e.g. inductive, capacitive)
- Process sensors (e.g. temperature sensors, pressure sensors, flow sensors)
- Optical sensors

Practical course:
- Familiarization with SW tools for simulation and computer-aided design methodology
- Design and calculation of circuits
- Simulative consideration of circuits (DC, AC, transient)
- Construction and commissioning of circuits

The lecture provides the most important basics for understanding commercially available sensors. In addition to the sensors, the technical realizations in components and assemblies as well as the application of the sensors in connection with electronic circuits are explained. In the exercises, problem solutions are developed for tasks in industrial electronics and sensor technology. Practical examples will be discussed in both the lecture and the exercises.

Practical course:
Students develop suitable circuit concepts based on a problem and dimension them using calculations and simulations. On the basis of constructed circuits, they evaluate the measurement results in comparison to expectations.
 

Formally, the requirements of the respective valid examination regulations apply

Written exam
Internship: ungraded proof of participation

Module examination must be passed
Internship: Ungraded proof of participation must be provided

BA Electrical Engineering

3,08%

Baumann, Peter: Ausgewählte Sensorschaltungen, Springer Verlag
Baumann, Peter: Sensorschaltungen - Simulation mit PSPICE, Vieweg+Teubner Verlag
Bernstein, Herbert: Messelektronik und Sensoren, Springer Verlag
Fraden, Jakob: Handbook of Modern Sensors, Springer Verlag
Schiessle, Edmund: Industriesensorik, Vogel Verlag
Schmidt, Wolf-Dieter: Sensorschaltungstechnik, Vogel  Verlag
Sedra, Adel S.: Microelectronic circuits, Oxford University Press
Tietze, Ulrich;  Schenk, Christoph:  Halbleiter - Schaltungstechnik, Springer Verlag
Diverse Handbücher der CAD-Anbieter

Students will be able to design an electronic circuit and implement it in the form of a circuit board that can be manufactured. They know the essential steps of a computer-aided layout design. Students are able to take into account important boundary conditions in the practical implementation of a circuit. This enables them to design and optimize a circuit and the layout with regard to practical requirements (e.g. reliability, temperature stability, service life, interference immunity).

Practical course:
Students will be able to implement an electronic circuit in the form of a printed circuit board with computer support. They know a standard CAD tool for PCB development and can use it. They will be able to assemble a circuit board, put it into operation and draw conclusions about possible improvements through measurements.

- Development processes
- Design methodology
- Overview of important CAD tools
- Types and use of components
- Printed circuit board technology
- Dimensioning of the printed circuit board and traces
- Conduction theory and application on printed circuit boards
- Signal propagation on printed circuit boards
- Line adjustments, termination
- Electromagnetic compatibility, interference avoidance

Practical course:
- Familiarization with SW tools for layout creation
- Application of the tools in the implementation of circuits in a PCB design
- Consideration of parasitic influences
- Commissioning and evaluation of the design objective

The lecture conveys the basic knowledge for implementing an electronic circuit in the form of a printed circuit board. In addition to technical problem solving, the exercises also focus on problem-solving skills and development methodology. Suitable practical examples are discussed both in the lecture and in the exercises.
Practical course:
Students convert circuit examples into a printed circuit board design using suitable software. After assembling and commissioning the circuit board, the function and any deviations are determined and documented using suitable measurements.

Formally, the requirements of the respective valid examination regulations apply

Written exam
Internship: ungraded proof of participation

Module examination must be passed
Internship: Ungraded proof of participation must be provided

BA Electrical Engineering

3,08%

Berger, Mario: Test- und Prüfverfahren in der Elektronikfertigung, VDE-Verlag
Bogatin, Eric: Signal and Power Integrity, Pearson Education
Franz, Joachim: EMV: Störungssicherer Aufbau elektronischer Schaltungen, Springer Verlag
Gustrau, Frank: Elektromagnetische Verträglichkeit, Hanser Fachbuchverlag
Lienig, Jens: Elektronische Gerätetechnik: Grundlagen für das Entwickeln elektronischer Baugruppen und Geräte, Springer Verlag
Schmidt, Manfred: Signalintegrität, Vogel Verlag
Thierauf, Stephen C.: High-speed Circuit board signal integrity, Artech House Publishers
Zickert, Gerhard: Leiterplatten - Stromlaufplan, Layout und Fertigung, Hanser Fachbuchverlag
Diverse Handbücher der CAD-Anbieter

Students gain an insight into current methods of integrated circuit design. They are informed about modern CMOS semiconductor processes and existing components. They are proficient in the use of transistor models for manual calculations and simulation. You will understand basic analog circuits and be able to assemble them into more complex functional blocks. You will identify critical operating parameters of the transistors used and their influence on the circuits. You are aware of the differences in the development of analog and digital circuits and can safely go through both design processes.

Practical course:
In the practical course, students learn how to use industrial design tools. They are able to design and simulate circuit diagrams. They can create and verify analog and digital layouts.

- CMOS semiconductor processes and existing components
- Work steps of the analog circuit design
- Transistor models for manual calculation and simulation
- Current mirrors and cascoding
- Operating point setting circuits
- Bandgap voltage reference
- Inverting and differential amplifier
- Compensation of two-stage amplifiers
- Work steps of the digital circuit design
- CMOS logic gate
- CMOS memory elements latch, flip-flops, SRAM

Practical course
- CMOS transistor and circuit simulation
- Parameterized process corner and Monte-Carlo verification
- Creation of layouts
- Testing of process rules (DRC)
- Checking the circuit consistency (LVS)
- Synthesis of models in hardware description languages
- Place route of synthesized netlists
- Creation of clock networks
- Verification of digital circuit implementations

Technical content is presented in lectures, which is consolidated in exercises by solving problems.

Practical course:
In the practical course, the implementation of the methods is practiced on the basis of small technical problems and with the help of industrial tools.

 

Formally, the requirements of the respective valid examination regulations apply

Written or oral exam
Internship: ungraded proof of participation

Module examination must be passed
Internship: Ungraded proof of participation must be provided

BA Electrical Engineering

3,08%

Baker, CMOS Circuits Design, Layout and Simulation, IEEE Press
Razavi, Design of Analog CMOS Integrated Circuits; Mc Graw Hill
Sansen, Analog Design Essentials, Springer

Students are familiar with methods of model-based development. They are able to apply these methods to control engineering or signal processing systems, for example, and to create implementation models for embedded processors or programmable logic circuits.

Practical course:
Students can use model-based development tools and test generated implementation code.

The course covers the methods of model-based development for embedded systems. Case studies from control engineering and signal processing are used.
The following are covered in detail:
- Implementation of requirements
- System behavior models
- Environment modeling
- Physical modeling (mathematical vs. component-based modeling approach)
- Implementation modeling (code generation for microcontrollers or with hardware description languages)
- Model-based testing: model-in-the-loop (MIL), software-in-the-loop (SIL), processor-in-the-loop (PIL), hardware-in-the-loop (HIL)

Practical course:
Experiments are carried out on the following topics:
- Development of an environment model through the characterization and subsequent modelling of the environment
- Development of a functional model from system behavior to implementation modeling
- Accompanying model-based testing

In the lecture, the methods are presented and explained in more detail using case studies. Mathematical and component-based modeling tasks are dealt with in the exercises. Analyses of the generated C or HDL code round off the subject area.

Practical course:
Students create and simulate models at various levels of abstraction at a PC workstation. They carry out model-based tests with microcontroller or FPGA experimental assemblies.

Formally, the requirements of the respective valid examination regulations apply
 

Written or oral exam
Internship: ungraded proof of participation

Module examination must be passed
Internship: Ungraded proof of participation must be provided

BA Electrical Engineering

3,08%

Angermann, A.; Beuschel, M.; Rau, M.; Wohlfarth, U.: MATLAB – Simulink – Stateflow, De Gruyter, 2021
Pietruszka, W. D.; Glöckler, M.: MATLAB und Simulink in der Ingenieurpraxis, Springer, 2021
Hoffmann, J.; Quint; F.: Signalverarbeitung mit MATLAB und Simulink, Oldenbourg, 2012
Online-Dokumentationen und Tool-Hilfen zu diversen Software-Tools der Firma MathWorks (z. B. MATLAB, Simulink, Stateflow, Simscape)
Online-Dokumentationen zur Code-Generierung mit diversen Codern der Firma Mathworks (z. B. Embedded Coder)

Students receive a practical introduction to the implementation of signal processing circuits. They are familiar with the simulation of digital and analog filters and can interpret the associated frequency characteristics. They will also be able to use resistors, capacitors, inductors and operational amplifiers to create active and passive analog filters. They are able to extract the transmission behavior of systems and describe it mathematically in the form of transfer functions. You are familiar with the structure and function of analog/digital and digital/analog converters. You will be able to select the correct sampling rate and pre-filtering for the application using the Nyquist criterion. You also understand the structure of digital filters and can implement them with FPGAs or signal processors, for example.

Practical course:
In the practical course, students learn how to use industrial design tools to simulate and design digital and analog filters. They are able to determine the appropriate filter characteristics from the requirements of an application.

- Description of component regularities in Laplace space
- Passive high and low pass filters as RLC network
- Transfer functions and frequency response
- Operational amplifiers and their basic circuits
- Analog/digital and digital/analog conversion
- Nyquist criterion for the sampling rate
- Design and implementation of digital filters

Practical course:
Experiments are carried out on the following topics:
- Simulation of filter circuits (e.g. with MATLAB)
- Implementation of analogue filter circuits
- Modeling and implementation of digital filter circuits (e.g. with FPGA)

In the lectures, technical content is presented, which is consolidated in exercises by solving problems. In the practical course, the implementation of the methods is practiced on the basis of small technical problems and with the help of industrial tools.

Formally, the requirements of the respective valid examination regulations apply

Written or oral exam
Internship: ungraded proof of participation

Module examination must be passed
Internship: Ungraded proof of participation must be provided

BA Electrical Engineering

3,08%

Meyer, M.: Signalverarbeitung, Springer, 2021
Hoffmann, J.; Quint, F.: Signalverarbeitung mit MATLAB und Simulink, Oldenbourg, 2012
Hoffmann, J.; Quint, F.: Signalverarbeitung in Beispielen, Oldenbourg, 2016
Werner, M.: Digitale Signalverarbeitung mit MATLAB, Springer, 2019
Meyer-Baese, U.: Digital Signal Processing with Field Programmable Gate Arrays, Springer, 2007
Kundert, K. S.; Zinke, O.: The Designer’s Guide to Verilog-AMS, Springer, 2004
Lapsley, P.; Bier, J.; Shoham, A.; Lee, E. A.: DSP Processor Fundamentals, Wiley-IEEE Press, 1997

Students have knowledge of modeling approaches for discrete-event systems, e.g. finite automata and Petri nets, and can use them to model, analyze and diagnose simple technical discrete-event systems.

Description of discrete-event systems
   - Automata
   - Petri nets
Behavior of discrete-event systems
   - Behavior of automata
   - Behavior of Petri nets
Control design of discrete-event systems

 

Seminar-based course. Selected practical examples are discussed in groups, modeled and simulated using computers.

Formally, the requirements of the respective valid examination regulations apply
Content: Control engineering, PLC technology

Written exam with coursework during the semester

Module examination must be passed

BA Electrical Engineering

1,54%

Jan Lunze: Automatisierungstechnik,  De Gruyter, 2016

Students know basic methods of data analysis and are also able to apply these themselves using Python
. apply them. They are able to familiarize themselves with the use of further numerical methods and Python libraries
familiarization.

Basic concepts of data processing and analysis with Python
- Importing data sets in various formats
- Visualization of two- and three-dimensional data sets
- Numerical and statistical processing of data
- Image manipulation and analysis
- Fitting and optimization methods
The methods presented include general approaches from data processing and visualization and
optimization. The focus of the course is on the practical application of the methods using generic and subject-specific examples
The subject-specific application examples used come from the field of environmental technology and the energy market and are continuously adapted.

Lectures, exercises with independent solving of practical tasks, independent development of teaching material

Formally, the requirements of the respective valid examination regulations apply
Content: Mathematics 1 and Mathematics 2, basics of programming

will be announced at the beginning of the semester

Module examination must be passed

BA Electrical Engineering

1,54%

Skript zur Vorlesung

Students know the structure and function of electronic control units against the background of control and regulation tasks in an overall mechatronic system. They understand the basic principles of model-based development and model-based testing, which they can classify in the context of the development of electronic control units. They are able to use the software tools MATLAB, Simulink and Simscape (MathWorks) to model and simulate software algorithms and electronic components and systems of control units. They are familiar with the difference between mathematical and component-based modeling. As an essential application example, they can also describe the functionality and control of a DC motor and can model and simulate it together with the associated control electronics using the above-mentioned tools and analyze the resulting simulation results.

The lecture provides an introduction to the technology and functionality of electronic control units using practical examples, particularly from the automotive industry. The electronic control unit consisting of hardware and software (HW/ SW) is considered as part of an overall mechatronic system:
- Control unit HW: printed circuit board and electronic components (electronics)
- Control unit SW: Control and regulation technology algorithms (computer science)
- Sensors and actuators, e.g. electromechanical components (mechanics)

Using practical examples from the field of control and regulation of DC motors, the focus is on the development of electronics and, in particular, software algorithms for control units. Model-based methods for development and testing with the professional software tools MATLAB, Simulink and Simscape (MathWorks) are used. A practical introduction to these software tools will be given:
- Possibilities for modeling and simulating dynamic systems
- Examples: RC element, RL element, DC motor (mode of operation and control)

There is also a practical introduction to model-based software development for embedded systems:
- Options for modeling and simulating software algorithms
- Options for generating code for microcontroller development boards
- Practical examples for the control and regulation of DC motors

In the lecture, the contents are presented and discussed in a fundamental way. The connections developed are then deepened in the exercises using the software tools MATLAB, Simulink and Simscape (MathWorks), among others, on the basis of practical examples.

Formally, the requirements of the respective valid examination regulations apply

Written or oral exam

Module examination must be passed

BA Electrical Engineering

1,54%

Reif, K.: Bosch Autoelektrik und Autoelektronik, Vieweg +Teubner, 2011
Angermann, A.; Beuschel, M.; Rau, M.; Wohlfarth, U.: MATLAB – Simulink – Stateflow, De Gruyter, 2021
Pietruszka, W. D.; Glöckler, M.: MATLAB und Simulink in der Ingenieurpraxis, Springer, 2021
Schäuffele, J.; Zurawka, T.: Automotive Software Engineering, Springer, 2016
Abel, D.; Bollig, A.: Rapid Control Prototyping, Springer, 2006
Online-Dokumentationen und Tool-Hilfen zu diversen Software-Tools der Firma MathWorks (z. B. MATLAB, Simulink, Simscape)

In this module, students learn to deepen their knowledge in the field of embedded systems. In addition to hardware knowledge of process units such as field programmable gate arrays, microcontrollers or systems-on-chip, students learn how to use the associated development environments by means of project work and practical exercises under technical and methodical guidance. Students gain an in-depth insight into the latest design methods for hardware and software design and a holistic overview of the realization of embedded systems. The project work is based on practical tasks from the field of robotics, for example. You will learn how different digital and analog peripheral components (e.g. time-of-flight sensors, global positioning systems, interactive measuring units) work and how they are used in practice. They also learn how to connect peripheral components to process units using various digital interfaces such as serial-peripheral interfaces, inter-integrated circuits or universal asynchronous receiver-transmitter interfaces. The project work also encourages students' creativity, independent problem-solving skills and personal development.

- Fundamentals of embedded systems and cyber-physical systems
- Architecture of practice-relevant process units (e.g. systems-on-chip, field-programmable gate arrays)
- Digital/analog assemblies of sensors and actuators (e.g. time-of-flight, global positioning system)
- Bus systems/interfaces and their application for linking digital assemblies
- Basic knowledge of hardware software code design
- Design and programming of sensor and actuator systems to solve a technical problem

 

In the lectures, technical content is presented, which is consolidated in exercises by solving problems. In the practical course, the implementation of the methods is practiced on the basis of small technical problems and with the help of industrial tools.

Formally, the requirements of the respective valid examination regulations apply
Content: Microcontroller technology, basics of programming

Presentation or oral examination

Module examination must be passed

BA Electrical Engineering

1,54%

Zynq Book
Lee, Seshia: "Embedded Systems - A Cyber-Physical Systems Approach", MIT Press, 2017
Marwedel: "Eingebettete Systeme - Grundlagen eingebetteter Systeme in Cyber-Physikalischen Systemen", Springer, 2021

Students should be familiar with the energy industry context of the energy market and understand basic technical, Business Studies, legal and regulatory contexts. Students should be familiar with the status quo for all stages of the value chain (generation, grids, trading and sales) and be able to discuss possible developments with their advantages and disadvantages. They should be familiar with and be able to evaluate the key issues of the energy transition. Among other things, they should be able to economically evaluate simple investments in the energy sector and understand and apply the framework conditions of the energy market. Furthermore, they should be able to independently develop and evaluate energy industry issues.

Economy, ecology and security of supply describe the target triangle of the energy industry. Together, these are  the criteria that energy systems must - at a minimum - fulfill today  Recently, a social component has apparently been added. What the status quo of the energy market looks like in relation to all stages of the value chain, i.e. decentralized/centralized generation, grids (electricity, gas, heat, H2, ...), trading and sales, what advantages and disadvantages there are in the respective future and current forms and how the respective stages of the value chain will change, will be presented and discussed in the course. The subject shows the framework conditions for the energy transition, i.e. a climate gas-neutral energy supply, across all stages of the value chain and in the context of European and international developments. Current developments (e.g. the current energy price brakes) are repeatedly examined and their implications for the energy transition are considered, as well as developments in other areas such as politics (Russia), digitalization (e.g. intelligent measuring systems, iMSys), business administration, economics and law with their effects on an energy system. Particular emphasis is placed on highlighting many practical references, some of which go beyond the energy industry context, e.g. project management, leadership behavior, SAP.

The theoretical specialist and methodological knowledge is presented, explained and discussed in the lecture. In exercises, the methodological knowledge imparted is applied and deepened using practical examples.
The lecture notes will be made available for download on the internet.

Formally, the requirements of the respective valid examination regulations apply

Exam

Module examination must be passed

BA Electrical Engineering, BA Energy Economics and Energy Data Management

1,54%

/

- Knowledge of the basic concepts and classifications of simulations
- Knowledge of the procedure for simulation studies
- Overview of the different types of simulation methods and their differentiation
- Evaluate the applicability of simulation methods for the respective task

The lecture Building Simulation introduces the methods of simulation technology. The thematic focus is on the investigation of energy-related issues in buildings. Particular emphasis is placed on the structured approach to simulation tasks. Based on a classification of simulation types, the procedure for selecting and creating suitable simulation models, carrying out simulations and evaluating the results are discussed. Different types of simulation methods are presented. These cover in particular the area of computer-aided tools. Insights are given into the mathematical modeling of the simulation tools. However, neither the lecture nor the exercise will deal with the programming implementation of the models (programming knowledge is therefore not necessary). The aim is rather to learn a structured approach to simulation and, knowing the strengths and weaknesses of the various tools, to select the most suitable one for the specific task and to be able to interpret its results correctly. Using the example of the heat balance of buildings, the procedure as well as the evaluation and interpretation of the results are deepened in the context of lectures and accompanying exercises on the computer.

The lecture provides an overview of terms, fundamentals and various methods of building simulation. In the exercises, these basic concepts are first deepened. Subsequently, based on an example building, calculations of the energy demand are carried out and compared using various methods (analytical calculation, static simulation, dynamic simulation).

Formally, the requirements of the respective valid examination regulations apply
 

Written or oral exam

Module examination must be passed

BA Electrical Engineering, BA Energy Economics and Energy Data Management

1,54%

- Sauerbier, Thomas : Theorie und Praxis von Simulationssystemen, Vieweg Studium Technik, Braunschweig (1999)
- Gieseler, U.D.J., Bier, W., Heidt, F.D.: Combined thermal measurement and simulation for the detailed analysis of four occupied low-energy buildings. Proceedings of the 8th Intern. IBPSA Conf., Building Simulation, Eindhoven (2003) vol. 1, pp. 391-398
- Gieseler, U.D.J; Heidt, F.D.: Bewertung der Energieeffizienz verschiedener Maßnahmen für Gebäude mit sehr geringem Energiebedarf, Forschungsbericht, Fachgebiet Bauphysik und Solarenergie, Universität Siegen, Fraunhofer IRB-Verlag, Stuttgart (2005)
- Deutsches Institut für Normung (DIN): DIN V 18599: Energetische Bewertung von Gebäuden, Beuth Verlag, Berlin (2018)
- Baehr, H.D., Stephan, K.: Wärme- und Stoffübertragung, Springer Verlag, Berlin (2006)
- Klein, S.A., Duffie, J.A. and Beckman, W.A.: TRNSYS - A Transient Simulation Program, ASHRAE Trans. 82  (1976) pp. 623 ff

 

Developments in energy distribution are being shaped by the ongoing energy transition and the transition to the age of digitalization.
These transformation processes result in adjustments and optimization in the electrical supply grid due to changes in the generation and consumer structure, both in grid planning and in grid operation.
This requires innovative solutions based on the integration of renewable energy sources into existing supply systems and the increasing use of electromobility.
The associated optimization of maintenance processes for plant operators requires strategy development and optimization of operational processes in the area of asset management (according to ISO 5500X) for plant operators.
In this module, students learn the fundamental issues in the field of grid planning under the framework conditions of digital transformation and the integration of renewable energy sources and electromobility.
After completing the module, students will be familiar with the necessary adjustments to the grid structure and the associated grid planning processes. They will be able to apply this knowledge to necessary adjustments in the area of grid structure and grid planning processes.

- Grid integration of decentralized generators
- Basics of grid planning
- Fundamentals of electromobility charging infrastructure from a grid planner's perspective
- Process flows in asset management according to ISO 5500X
- Maintenance processes for various grid operating resources

 

Seminar-based teaching

Formally, the requirements of the respective valid examination regulations apply

Written or oral exam

Module examination must be passed

BA Electrical Engineering, BA Energy Economics and Energy Data Management

1,54%

/

Students know the properties and selection conditions of basic high-voltage insulation materials and can describe them. They know the basic types of stresses on insulation arrangements and can characterize them. Students know the characteristic failure mechanisms of high-voltage insulation systems and are able to identify load limits. Based on this, students can propose innovative solutions to optimize the characteristic properties of insulating materials. Students can propose application-related tests to qualify insulating materials with regard to their characteristic properties and to test and monitor insulating arrangements during acceptance tests and during operation.

 

Technical stresses on insulation systems and design to withstand stresses
Insulating materials - single-material dielectrics
Insulation material system - multi-material dielectrics
Evaluation of insulating materials and insulating material systems
Interfaces and field controls
Production of insulation systems and QA measures
Example of operating equipment: Insulation systems for rotating electrical machines
Example of equipment: Nanoparticle-filled epoxy resin system
Innovative self-healing insulating materials
Example of equipment: Cable insulation
Example of equipment: HVDC backer for mixed loads
Monitoring and diagnosis of insulation systems

Seminar lecture
Exercise
Seminar presentation (optional)
1-2 excursions (optional & by arrangement)

Formally, the requirements of the respective valid examination regulations apply

Written or oral exam with fewer than 10 registered participants
A part of the examination can be acquired in advance by arrangement in the context of lecture-related seminar presentations.

Module examination must be passed

BA Electrical Engineering, BA Energy Economics and Energy Data Management

1,54%

S. Kempen: Unterlagen zur Vorlesung
A. Küchler: Hochspannungstechnik

The field of power plants is covered comprehensively, from the basics of energy supply,  to the technical and political boundary conditions and the conventional and new technologies for power generation and storage. The aim is to enable students to understand the energy supply system from generation to marketing of the electricity product and to recognize future trends. Students will learn about the development from fossil to renewable electricity generation, the advantages and disadvantages of conventional and renewable technologies and the associated challenges for grids and storage. In addition to the technologies, students will learn the basics of the development, planning, economic evaluation, construction, commissioning and operation of power generation plants. This enables students to analyze, evaluate and implement various power plant projects.

Basics of energy supply - terms and units, politics and law in Germany and Europe;
Energy sources - occurrence, properties and use in Germany, the EU and the world;
Electricity - product, market and prices;
Structure of the electricity supply - grids and grid usage;
Power plants - energy conversion, technologies, costs and business studies Development - coal, nuclear power, gas, CCGT, CHP, industrial power plants;
Promotion and prospects for renewable energies - wind, water, biomass, sun, sea;
Storage - water, batteries, hydrogen, gas, "Norway", power-to-X,
Operation and maintenance, digitalization in power plant technology
Security of supply / "energy transition" - power plant deployment, cost structures, supply and demand
Power generation projects / power plant construction - from the idea to commissioning - determining and evaluating profitability

 

The specialist knowledge is presented and deepened in lectures. Seminar elements such as videos, practical examples and discussions of current developments contribute to understanding and liveliness. Manual calculation examples are used to apply the knowledge taught. The lecture notes will be made available for download on the internet.

Formally, the requirements of the respective valid examination regulations apply

Written or oral exam

Module examination must be passed

BA Electrical Engineering, BA Energy Management

is calculated in the course-specific handbook

Diekmann, Rosenthaler: Energie: Physikalische Grundlagen ihrer Erzeugung, Umwandlung und Nutzung
VDI: Kraftwerkstechnik: zur Nutzung fossiler, nuklearer und regenerativer Energiequellen
Funke: Skript zur Vorlesung Kraftwerksanlagen

- Knowledge of the basic radiometric and photometric quantities.
- Knowledge of the measurement methods of the basic quantities.
- Understanding of how different light sources work.
- Knowledge of the requirements for interior lighting.
- Understanding the relationship between light generation and energy consumption.
- Application of radio and photometric quantities to evaluate light sources
    with regard to their use inside and outside buildings.
- Foreign language skills (English)

The lecture light technology introduces the technologies of light production and efficient illumination. First, the underlying fundamentals and relevant physical measures for light are introduced. This is followed by methods for light measurement and detection, including the human eye. The main part of the lecture covers the different mechanisms and technologies of light production. Corresponding sources include: Sun and Daylight, thermal radiators, electric discharge lamps, electroluminescent sources and light emitting diodes (LED). Applications presented are mainly in the area of light sources used in buildings and illumination techniques. Special consideration is given to energy efficient lighting in buildings.

The lecture teaches the basic parameters of lighting technology and their measurement methods, the fundamentals of light generation and applications in lighting technology. As part of the exercises, students should solve tasks on the application of the basic variables of lighting technology from the fields of measurement technology, light generation and lighting technology as independently as possible and present these in a joint discussion.  
Lectures and exercises are held in English.

Formally, the requirements of the respective valid examination regulations apply
Content: Mathematics (especially differential and integral calculus)

Written or oral exam

Module examination must be passed

BA Electrical Engineering, BA Energy Economics and Energy Data Management

1,54%

Wyszecki, G.; Stiles, W.S.: Color Science. John Wiley & Sons, New York (2000)
Lighting Press International (LPI), PPVMEDIEN, periodical (English/German)
Hentschel, H.-J.: Licht und Beleuchtung, Hüthing Verlag, Heidelberg (2002)
Gall, D.: Grundlagen der Lichttechnik, Pflaum Verlag München (2007)
Schubert, E.F.: Light Emitting Diodes, E-Book, Cambridge University Press (2006)
Jacobs, A.: SynthLight Handbook, Low Energy Architecture Research Unit, LEARN,
         London Metropolitan University (2004),
        https://www.new-learn.info/packages/synthlight/handbook/index.html

 

Students understand the basic concepts of model-based fault diagnosis and have knowledge of the definition and classification of fault diagnosis, selected model-based methods of fault diagnosis and their application conditions and limitations. They can select a suitable model-based method for fault diagnosis for simple technical systems and design a fault diagnosis system accordingly. They are proficient in technical terms relating to fault diagnosis in English.

Basic concepts
   - Definition and classification of fault diagnosis techniques
   - Model-based fault detection and diagnosis
Description and analysis of technical systems
   - Modeling
   - Fault detectability, isolability and identifiability
Parity equation and parity space approach                                                                                                                                                                                                                                                                                                                                                                                      Observer-based fault diagnosis
   - Observer design
   - Observer bank
Fault diagnosis methods considering unknown inputs

Seminar-based course in English. Selected practical examples are discussed in groups, modeled and simulated with computer support.

Formally, the requirements of the respective valid examination regulations apply
Content: Control engineering

Written exam with coursework during the semester

Module examination must be passed

BA Electrical Engineering

1,54%

S.X. Ding: Model-based Fault Diagnosis Techniques, Springer, 2013
 J. Chen, R.J. Patton: Robust Model-Based Fault Diagnosis for Dynamic Systems, Springer, 1999

Students should expand their knowledge of the various areas of sustainability, ecology, economy and social issues. They should discuss the necessity and consequences of sustainable developments together with students from other faculties.

As part of the seminar-based course, students strengthen key skills such as structured documentation & presentation of work results, as well as their discussion in the group.

- Social responsibility and sustainability
- Ecological sustainability, energy management, environmental management, sustainable mobility
- Economic sustainability: sustainability in business management
- Social sustainability and ethics of sustainability
- Supplements for the preparation of essays (reports and presentations)

seminar lecture

Formally, the requirements of the respective valid examination regulations apply

Presentation (possibly on the basis of a written elaboration)

Module examination must be passed

BA Electrical Engineering, BA Energy Economics and Energy Data Management

1,54%

/

The subject area deals with the future orientation of electricity grids in the context of the energy transition. The new requirements, in particular the challenges of implementing the energy transition from a grid perspective, are discussed and grid strategies and the new role of grid operators to fulfill them are shown. New measurement, control and regulation technology as well as the use of innovative components in the grid area and smart household technology are presented to the listener and conveyed using practical examples. The listener deepens their knowledge by learning the basics of the structure of the concepts and components, the mode of operation and the advantages and disadvantages of using the grid. New planning and operating concepts for grid management and innovative tools for grid planning  are also discussed.

Challenges in implementing the energy transition in the grid sector
Grid planning / Innovative planning approaches and operating concepts / Implementation of digitalization in the grids
Smart metering and measuring systems, use of information and communication technology in the grid sector, smart household technology (smart  home)
Voltage regulators (rONT,  wide-range regulation, electronic regulators)
Intelligent local substations, charging stations for electric vehicles, controllable mains switches
Storage systems (home storage, grid storage, power to gas, ...)
Superconductors,  Weather-related overhead line utilization, high-temperature conductor cable
Smart energy grids (high, medium and low voltage)
Grid strategies
Future role of grid operators

 

The specialist knowledge is presented in the form of lectures and practical examples are used to deepen the theoretical foundations of the concepts and novel components    Examples of the use of these new concepts and technologies in the network area are shown and then analyzed and  evaluated by the students.
The lecture notes will be made available for download on the web. In addition, there is film material to deepen the respective content as well as various specialist articles.

Formally, the requirements of the respective valid examination regulations apply

Written or oral exam

Module examination must be passed

BA Electrical Engineering, BA Energy Economics and Energy Data Management

1,54%

Bernd Michael Buchholz, Zbigniew Antoni Styczynski:  Smart Grids: Grundlagen und Technologien;
Mathias Uslar, Michael Specht, Christian Dänekas, Jörn Trefke, Sebastian Rohjans, José M. González, Christine Rosinger, Robert Bleiker: Standardization in Smart Grids: Introduction to IT-Related Methodologies, Architectures and Standards
Sterner, Michael, Stadler, Ingo: Energiespeicher - Bedarf, Technologien, Integration
Wolfgang Schellong: Analyse und Optimierung von Energieverbundsystemen
Stefan Willing: Skript zur Vorlesung Netzstrategien und Innovative Betriebsmittel
Diverse Fachartikel

After successfully completing the module, students will be able to
- design algorithms for the numerical solution of classical mathematical problems (solving equations, differential & integral calculus, differential equations)
- apply numerical interpolation methods
- assess the performance of a numerical algorithm in terms of its runtime
- analyze the convergence of a numerical algorithm
- present the advantages and disadvantages of machine learning methods
- recognize areas of application of Monte Carlo methods.

- Fundamentals of computers, algorithms & discretization
- Numerical solution of equations with one variable
- Interpolation
- Numerical differential & integral calculus
- Numerical solution of differential equations
- Numerical solution of systems of equations
- Approximation theory
- Random numbers & Monte Carlo simulations
- Artificial intelligence & machine learning

2 hours lecture + 1 hour exercise. The technical concepts and content are taught in the lecture.
The numerical methods are put into practice in calculation and programming tasks and students are enabled to independently design numerical solutions for practical applications.
The solutions are presented and discussed in the joint practice sessions.

Formally, the requirements of the respective valid examination regulations apply

Written or oral exam

Module examination must be passed

BA Electrical Engineering

1,54%

-Faires, Burden: Numerische Methoden, Spektrum Lehrbuch
-Zurmühl: Praktische Mathematik, Springer
-Huckle, Schneider: Numerische Methoden, Springer
-Gerlach: Computerphysik, Springer (Einführungskapitel)

Students learn about the components of a typical switching transformer and understand how they interact. They are able to design the individual components according to specification and can understand the derivation of the formula used for this. Students will be able to ensure the stability of the controller by selecting the appropriate controller parameters and evaluate them by simulation. They know typical converter architectures and modulation and control types and what the advantages and disadvantages of the individual approaches are. They know which properties of a switching controller are relevant for the application and can make design decisions in the development process to achieve the required properties.

-Components and function of a voltage-controlled buck converter
-Design rules of the LC filter
-Dimensioning of the switching stage
-Controller design and stabilization
-Extraction of the controller properties through simulation
-Gap and non-gap operation
-Current control
-Hysteresis control
-Multiphase and multilevel converters
-Zero current and zero voltage switching
-Resonant operation

Lecture, exercise, seminar

Formally, the requirements of the respective valid examination regulations apply

Written or oral exam

Module examination must be passed

BA Electrical Engineering

1,54%

Basso, Switch-Mode Power Supplies, Second Edition: SPICE Simulations and Practical Designs, 2014
Choi, Pulsewidth Modulated DC-to-DC Power Conversion: Circuits, Dynamics, and Control Designs,  Wiley IEEE-Press, 2013

In the course "Special electrical machines", students are enabled to apply the knowledge they have acquired in the fundamentals of electrical machines to a wide range of special machines.

Students learn about various requirements for which standard machines can no longer be used. On the one hand, they can explain why special machines are required and, on the other, why the special machines used meet the exact requirements. For each machine, its design, areas of application and operating behavior are explained and evaluated.

 

Synchronous reluctance motor, Linear motor, Hermetic pumps (canned motor, magnetic coupling), Submersible motor, High-speed motor, Stepper motor, High-torque motor, Explosion-proof motor, Axial flux motor, High-efficiency motor

Seminar course, presentations

Formally, the requirements of the respective valid examination regulations apply

Written or oral exam or presentation

Module examination must be passed

BA Electrical Engineering

1,54%

Fachartikel, Herstellerinformationen

Establishment of communication skills in the technical English language.
Ability to read, understand and communicate operating and programming instructions, technical data sheets, data sheets.
Students can create and give a presentation in English on technical topics

Technical vocabulary of the ET  /  Technical vocabulary of the ET
Specific features of technical literature (technical periodicals, technical sheets)  /  Specific features of technical literature (technical periodicals, technical sheets)
Technical translations German / English and English / German  /  Technical translations German / English and English / German
Preparation of a presentation in English  /  Working out an English presentation

Seminar course, presentations

Formally, the requirements of the respective valid examination regulations apply

Written or oral exam

Module examination must be passed

BA Electrical Engineering, BA Energy Economics and Energy Data Management

1,54%

Technische Datenblätter, Fachartikel (z. B. IEEE), diverse Lehrbücher "Technical English" / "English for Engineers"

The "practical work experience" is intended to introduce students to professional activities through concrete, practice-oriented tasks or practical work in companies
or other institutions of professional practice.
In particular, it should serve to apply and reflect on the knowledge and skills acquired during previous studies by working on a specific task.

The "operational practice" is the independent completion of a project with demonstrable practical relevance.
The description, explanation and presentation of the solution worked on are part of the module and already serve as preparation for the Bachelor's thesis.
The task comes from one of the subject areas available in the study program.
Students are supported by a mentor from the university while working on the project.

/

Formally, the requirements of the respective valid examination regulations apply

Project-related work with documentation and presentation

Module examination must be passed

BA Electrical Engineering, BA Energy Economics and Energy Data Management

5,13%

/

In the Bachelor's thesis, students should apply the specialist, methodological and key skills they have acquired during their studies to a complex task in a specialist area within a specified period of time. In this thesis, they acquire the ability to independently process and document both subject-specific details and interdisciplinary contexts using scientific and practical methods.

In the colloquium, the results of the work are to be presented in the form of a specialist lecture. Students should present the key points, methods and problem areas of the thesis in a concise form. Students are proficient in techniques for presenting, explaining and defending the results obtained in the field of work dealt with in the thesis. They can take part in a specialist discussion on the topics of the thesis, place them in the respective overall industrial framework and answer questions about scientific solutions and their boundary conditions;

The bachelor's thesis is an independent examination of a practical, engineering-related task with a detailed presentation and explanation of its solution. The task comes from one of the subject areas available in the study program. External work in an industrial company is possible and desirable. The conditions of the examination regulations must be observed.
The Bachelor's thesis is usually completed in the sixth or seventh semester and covers a continuous period of 12 weeks.
The specified deadlines can be found in the examination regulations.

The Bachelor's thesis is completed with a specialist presentation as part of a colloquium. The thematically defined task area of the thesis is worked through and presented using engineering methods.
Argumentation chains for the chosen approach and the content-related approach to the work are formed and discussed.

/

Formally, the requirements of the respective valid examination regulations apply

Thesis and presentation

Module examination must be passed

BA Electrical Engineering, BA Energy Economics and Energy Data Management

Thesis: 15%, colloquium: 5%

/